# Operational Qualifications Results upload prompt at end of run on the MiniSeq

A prompt to upload Operational Qualifications Results can be seen on the MiniSeq with Control Software (MnCS) v2.1.0.

After completing the first run after the software version is installed, a prompt appears asking to upload Operation Qualification (OQ) results to BaseSpace Sequence Hub (BSSH). Until a selection is made, the run will still show as Analyzing in BSSH.

![](/files/QR4kU4VJiVIbvHTEVW38)

If the instrument is power cycled or the control software (MnCS) is exited between runs, this prompt will reappear after the next run.

These results are not critical for most users and are not required to be uploaded for the operation of the instrument. Select "Don't Ask Again" to prevent this pop-up in future runs.

\
\
\ <br>

|                                                                                                                                                                                                                                                                                                                                                                        |
| :--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------: |
| *For any feedback or questions regarding this article (Illumina Knowledge Article #2236), contact Illumina Technical Support* [*techsupport@illumina.com*](mailto:techsupport@illumina.com?subject=Question%2FFeedback%20Regarding%20Illumina%20Knowledge%20Article%20#000002236%20-%20Instrumentation%20\&body=Dear%20Illumina%20Technical%20Support,%0D%0A%0D%0A)*.* |


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://knowledge.illumina.com/instrumentation/miniseq/instrumentation-miniseq-troubleshooting-list/000002236.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.