Comment on page
Troubleshooting

Instrumentation > MiniSeq > Troubleshooting
​Blank BaseSpace login screen during run setup on MiniSeq Control Software v2​
​Chemistry and Imaging on MiniSeq​
​Import run option is not available following Local Run Manager Upgrade to 1.3.1 on MiniSeq​
​MiniSeq Control Software v2.0 not able to display BaseSpace page on the MiniSeq​
​MiniSeq run display anomaly in Sequencing Analysis Viewer with Mid Output Flow Cells​
​Operational Qualifications Results upload prompt at end of run on the MiniSeq​
​Pre Run Check Troubleshooting on the MiniSeq​
​Pre run check stalls on flow cell registration after installation of MiniSeq Control Software v2.0​
​Single Read option not available with Resequencing Analysis for the TruSeq HT kit on the MiniSeq​
​The optimal cluster density and PhiX loading concentration for MiniSeq runs​
​Troubleshooting "Ebox0 Fan is not operating as expected" warnings on the MiniSeq​
​Troubleshooting "Error in Fluidics, LanePump" error on the MiniSeq​
​Troubleshooting "RunCopyService executable does not exist" error in MiniSeq Control Software 1.3.1​
​Troubleshooting "Y Stage Initialization Error Operation home failed..." errors on the MiniSeq​
​Troubleshooting Computer reboot hangs with Illumina logo splash screen on MiniSeq​
​Troubleshooting Duplicate analysis folders created for runs with successful LRM analyses on MiniSeq​
​Troubleshooting MiniSeq Z stages are not ready initialization error​
​Troubleshooting MiniSeq fails optical and stage tests "While measuring LED power"/"Failed XY Stage"​
​Troubleshooting RFID block can not be written (due to lock status) Error on the MiniSeq​
​Troubleshooting Timeout waiting 60000 ms within event EventToBlockingConverter error on the MiniSeq​
​Troubleshooting Windows 10 needs to be activated error on the MiniSeq.​
​Troubleshooting a "Syringe Overload" error on the MiniSeq​
​Troubleshooting camera, cluster, and focus errors at cycle 1 on the MiniSeq​
​Troubleshooting socket errors on the MiniSeq​
​Troubleshooting validation errors displaying when opening "module create run" page on the MiniSeq​
​Troubleshooting “Unable to create Output folder. MiniSeq does not have access to…” on MiniSeq​
​Unable to pass pre run checks with Imaging Limits test on the MiniSeq​
​Wash Error "Binary Part number revision .. byte1 is invalid" on the MiniSeq​
Last modified 12d ago