Troubleshooting

Instrumentation > NovaSeq 6000 > Troubleshooting

• Best practices for preparing and inspecting NovaSeq 6000 flow cells for sequencing

• Best practices for starting staggered runs on the NovaSeq 6000

• How to troubleshoot D:\ drive full on the NovaSeq 6000

• How to troubleshoot NovaSeq 6000 Process Management errors

• How to troubleshoot NovaSeq 6000 light bar issues

• How to troubleshoot NovaSeq 6000 “A component failed during sequencing” error during a Cloud Outage

• How to troubleshoot Reagent Selector Valve Errors on the NovaSeq 6000

• How to troubleshoot failed to reach target temperature error on the NovaSeq 6000

• How to troubleshoot flow cell clamp or vacuum is unable to engage errors when loading flow cells on the NovaSeq 6000

• How to troubleshoot “A component failed during sequencing” error messages on the NovaSeq 6000

• NovaSeq 6000 Initialization failed at 92% (NVCS 1.5, 1.6) or 93% (NVCS 1.7)

• NovaSeq 6000 Run Quality and Best Practices Support Webinar Video

• Run listed as Uploading to Network or BaseSpace on the NovaSeq 6000

• Troubleshooting "Component Failed" errors immediately after Pre Run Checks on the NovaSeq 6000

• Troubleshooting "Instrument Shell has Stopped Working" on the NovaSeq 6000

• Troubleshooting "Unsupported Cluster Cartridge" warning during Run Setup on the NovaSeq 6000

• Troubleshooting "flow cell is not sufficiently level" error on the NovaSeq 6000

• Troubleshooting "ix_exception_id_errno_exist: 'Already Exists' on command" on the NovaSeq 6000

• Troubleshooting BIM SOUR 2 Handle Position Errors During NovaSeq 6000 System Checks

• Troubleshooting Black Screen with EFI Shell message on the NovaSeq 6000

• Troubleshooting CE or Z:\ drive not connecting on the NovaSeq 6000

• Troubleshooting Fatal error, exiting application. Unable to find device on the NovaSeq 6000

• Troubleshooting Network errors during run setup on the NovaSeq 6000

• Troubleshooting NovaSeq 6000 Control Software fails to initialize with Universal Copy Service error

• Troubleshooting NovaSeq 6000 Reagent Chiller outside acceptable range warning

• Troubleshooting NovaSeq 6000 failing to initialize control software at 94 95%

• Troubleshooting NovaSeq 6000 flow cell loading issues Video

• Troubleshooting NovaSeq 6000 optical alignment errors, BIRD warnings, and Objective Contamination

• Troubleshooting NovaSeq 6000 reagent RFID failures

• Troubleshooting Pressure decay or Impedance test stopped with NaN results on the NovaSeq 6000

• Troubleshooting SAV errors on the NovaSeq 6000

• Troubleshooting Unable to Start Real Time Analysis on the NovaSeq 6000

• Troubleshooting an Unable to Generate a Focus Model Error on the NovaSeq 6000

• Troubleshooting decreased intensity and clusters passing filter at flow cell inlet on NovaSeq 6000

• Troubleshooting laser coolant temperature errors on the NovaSeq 6000

• Troubleshooting pre run check errors on the NovaSeq 6000

• Troubleshooting the "Unable to load recipe" error on the NovaSeq 6000

• Troubleshooting the large used reagent bottle is full error on the NovaSeq 6000

• Troubleshooting vacuum failures and flow cell vacuum is no longer engaged message on NovaSeq 6000

• Troubleshooting “Unable to Register Fiducial” error on the NovaSeq 6000

• Using expired reagents on the NovaSeq 6000