Troubleshooting

Instrumentation > MiSeq > Troubleshooting

• Best practices to avoid low cluster density on the MiSeq

• How to Check if a MiSeq Cartridge was pierced during a run.

• How to access Windows on the MiSeq if there is black screen at boot up

• How to recover Local Run Manager v3 Account when locked out

• How to troubleshoot MiSeq runs taking longer than usual or expected

• How to troubleshoot The process cannot access the file error on MiSeq

• Troubleshooting "@@@ Failed to get temperature" error on the MiSeq

• Troubleshooting "Compensator Move and/or Sensor Failed" errors on the MiSeq

• Troubleshooting "Conflict" errors at end of MiSeq runs

• Troubleshooting "Initialize Cameras before capturing images" error on the MiSeq

• Troubleshooting "Primary Analysis Not Ready" errors during Pre run Checks on MiSeq

• Troubleshooting "TEC2SERVO unrecognize char" error during MiSeq Control Software initialization

• Troubleshooting "Unable to communicate with BaseSpace" error when setting up MiSeq run on Windows 10

• Troubleshooting "Unsuccessfully attempted to launch module type" error with LRMv3 on MiSeq

• Troubleshooting "Y home sensor never tripped" error on MiSeq

• Troubleshooting 'Index outside the bounds of the array' error on the MiSeq

• Troubleshooting Camera exception, error= 360: Failed to perform sBCa on the MiSeq

• Troubleshooting Cannot get Value value (type Boolean) errors on the MiSeq

• Troubleshooting Cavro Pump Error on MiSeq

• Troubleshooting FASTQ Generation failing to start automatically in MiSeq using MiSeq Reporter

• Troubleshooting FASTQ generation not occurring automatically after a MiSeq run has completed successfully and successfully uploaded to BaseSpace

• Troubleshooting FPGA RFID ERROR STATUS 2 errors on the MiSeq

• Troubleshooting FPGA Timeout Errors on the MiSeq

• Troubleshooting Focus Mirror Error on the MiSeq

• Troubleshooting Free Disk Space errors during Pre run Checks on MiSeq

• Troubleshooting Green LED Failed polling LED status error on MiSeq

• Troubleshooting Invalid Role Errors after Post Run Washes on the MiSeq

• Troubleshooting LRM error "Valid index kit must be provided for the selected library prep kit"

• Troubleshooting Lane Pump Errors on the MiSeq

• Troubleshooting MiSeq "Z Motor The Z stage amp Op amp might not be wired correctly" Error

• Troubleshooting MiSeq "a valid index kit must be provided for the selected library prep kit" error

• Troubleshooting MiSeq Control Software (MCS) v4 stalling during initialization

• Troubleshooting MiSeq Read 2 low intensity and quality scores

• Troubleshooting MiSeq washes taking extended time to complete

• Troubleshooting MiSeqOverride.cfg Errors on the MiSeq

• Troubleshooting Network Connection Active errors during Pre run Checks on MiSeq

• Troubleshooting PR2 Bottle Not Detected Error on the MiSeq

• Troubleshooting RFID Not Recognized Error on the MiSeq

• Troubleshooting RFID cannot be written error on the MiSeq

• Troubleshooting Reagent Valve errors on the MiSeq

• Troubleshooting SIPDOWN Errors on the MiSeq

• Troubleshooting Sample Sheet will not Load into MiSeq Control Software

• Troubleshooting Sipdown Errors on the MiSeq video

• Troubleshooting Stalled Flow Rate Check on the MiSeq

• Troubleshooting Waste Bottle is Full notification on the MiSeq

• Troubleshooting Y Motor Errors on the MiSeq

• Troubleshooting Z Motor Positive soft limit too nonlinear at innermost test point on the MiSeq

• Troubleshooting Z motor errors occurring mid run on the MiSeq

• Troubleshooting a MiSeq "Consecutive Camera Failure Limit has been Exceeded for this Run" error

• Troubleshooting a bubble in MiSeq flow cell

• Troubleshooting access to the path Global\Local Run Manager is denied on MiSeq

• Troubleshooting an Object Reference Error on MiSeq

• Troubleshooting best focus errors occurring mid run on the MiSeq

• Troubleshooting cycle 1 errors on the MiSeq

• Troubleshooting failed MiSeq system checks

• Troubleshooting file is not properly formatted warning on the MiSeq

• Troubleshooting frozen MiSeq Control Software

• Troubleshooting high cluster density on MiSeq

• Troubleshooting low cluster density on the MiSeq

• Troubleshooting mid run shutdowns or reboots on the MiSeq

• Troubleshooting no intensity for index read on MiSeq

• Troubleshooting scratched or damaged flow cells on MiSeq

• Troubleshooting unable to measure flow rate errors on the MiSeq