Troubleshooting

Instrumentation > MiniSeq > Troubleshooting

• Blank BaseSpace login screen during run setup on MiniSeq Control Software v2

• Chemistry and Imaging on MiniSeq

• Import run option is not available following Local Run Manager Upgrade to 1.3.1 on MiniSeq

• MiniSeq Control Software v2.0 not able to display BaseSpace page on the MiniSeq

• MiniSeq run display anomaly in Sequencing Analysis Viewer with Mid Output Flow Cells

• Operational Qualifications Results upload prompt at end of run on the MiniSeq

• Pre Run Check Troubleshooting on the MiniSeq

• Pre run check stalls on flow cell registration after installation of MiniSeq Control Software v2.0

• Single Read option not available with Resequencing Analysis for the TruSeq HT kit on the MiniSeq

• The optimal cluster density and PhiX loading concentration for MiniSeq runs

• Troubleshooting "Ebox0 Fan is not operating as expected" warnings on the MiniSeq

• Troubleshooting "Error in Fluidics, LanePump" error on the MiniSeq

• Troubleshooting "RunCopyService executable does not exist" error in MiniSeq Control Software 1.3.1

• Troubleshooting "Unable to create Output folder. MiniSeq does not have access to…" on MiniSeq

• Troubleshooting "Y Stage Initialization Error Operation home failed..." errors on the MiniSeq

• Troubleshooting Computer reboot hangs with Illumina logo splash screen on MiniSeq

• Troubleshooting Duplicate analysis folders created for runs with successful LRM analyses on MiniSeq

• Troubleshooting MiniSeq Z stages are not ready initialization error

• Troubleshooting MiniSeq fails optical and stage tests "While measuring LED power"/"Failed XY Stage"

• Troubleshooting RFID block can not be written (due to lock status) Error on the MiniSeq

• Troubleshooting Timeout waiting 60000 ms within event EventToBlockingConverter error on the MiniSeq

• Troubleshooting Windows 10 needs to be activated error on the MiniSeq.

• Troubleshooting a "Syringe Overload" error on the MiniSeq

• Troubleshooting camera, cluster, and focus errors at cycle 1 on the MiniSeq

• Troubleshooting socket errors on the MiniSeq

• Troubleshooting validation errors displaying when opening "module create run" page on the MiniSeq

• Unable to pass pre run checks with Imaging Limits test on the MiniSeq

• Wash Error "Binary Part number revision .. byte1 is invalid" on the MiniSeq