Equipment used in the Infinium XT protocol
Hybridization
XT Hyb Chamber (PN: 20011755) + Gasket (PN: 20012127)
Image of XT Hyb Chamber and Gasket:
XT Dual Hyb Inserts and Baseplates (PN: 20011759):
These parts have a dual purpose, as a Hyb chamber assembly insert and a baseplate for the XT BeadChips on the Tecan deck during Hybridization:
Used to hold BeadChips 1) on the Tecan deck and 2) inside the XT Hyb chambers.
Up to three XT Dual Hyb Insert and Baseplate can fit into one XT Hyb chamber, holding a total of up to six XT BeadChips.
Image on Placing BeadChips on Baseplates:
Image of XT Hyb Chamber and three XT dual Hyb inserts and baseplates:
Infinium 96-XT Tip Guide Set (PN: 20011102)
Comes with:
XT Tip Guide #1 is used to load samples from sample well columns 1-4.
XT Tip Guide #2 is used to load samples from sample well columns 5-8.
XT Tip Guide #3 is used to load samples from sample well columns 9-12.
Image of Tip Guides and XT plate layout:
XStain
XT (XCG) Flow-Through Chamber Assembly Tray (PN: 20011760)
Tray to hold up to six XT BeadChips in frames during flow-through chamber assembly.
No alignment bar included.
Image of XT Flow-Through Chamber Assembly Tray:
XT (XCG) Flow-Through Chamber Frames (PN: 20011757 for set of 8)
Supports XT BeadChips during flow-through chamber assembly.
Image of the XT Frame
XT (XCG) Flow-Through Chambers (set of 8, PN: 20012129)
Includes XCG glass back plates, XCG clips, and XCG frames
Image of XCG glass back plates, XCG clips, and XCG frames (BeadChip not included)
XT (XCG) Glass Back Plates
This glass back plate has an integrated spacer.
PN: 20011756 for a set of 8
XT (XCG) Flow-Through Chamber Clamps (Clips)
To secure the glass back plate onto the BeadChip.
PN: 20007046 for 1
PN: 20011758 for set of 16
Reference:Infinium XT Assay Reference Guide for the ST Workflow
For any feedback or questions regarding this article (Illumina Knowledge Article #6249), contact Illumina Technical Support techsupport@illumina.com.
Last updated
Was this helpful?