> For the complete documentation index, see [llms.txt](https://knowledge.illumina.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://knowledge.illumina.com/instrumentation/general/instrumentation-general-troubleshooting-list/000009297.md).

# Troubleshooting Flow Cell Vacuum Failed to Engage on the NovaSeq X Series

**Background**

Users may encounter the error "Flow Cell Vacuum did not properly engage the flow cell" during pre-run checks on the NovaSeq X Plus. The error will advise removing the flow cell, cleaning the flow cell and stage with a lint-free cloth and reloading the run.

"The Flow Cell vacuum did not properly engange the Flow Cell. Remove Flow Cell and wipe Flow Cell Stage with dry lint-free cloth, checking for glass chips or dust."

![](https://761066130-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGM9W2DuBTgEXv1ClCm8H%2Fuploads%2Fgit-blob-8a06a5c02b4d7147359bed87225a54e3d3ced8b3%2Fimage1.png?alt=media)

**Troubleshooting actions**

1. Select **Reload consumables**.
2. Remove Flow Cell and wipe Flow Cell Stage with dry polynit heatseal wipe, checking for glass chips or dust. Wipe in a lengthwise direction only.
3. Retry starting the run.

If the error persists:

1. Power Cycle the instrument. For complete guidance on power cycling the instrument, see [How to Power Cycle the NovaSeq X Series Instruments](https://knowledge.illumina.com/instrumentation/novaseq-x-x-plus/instrumentation-novaseq-x-x-plus-reference_material-list/000007478.md).
2. Perform a Maintenance Wash using a wash flow cell and previously used cartridges. If there is an issue with the vacuum, the instrument will prevent the wash from proceeding with a similar error. For full instructions, see [How to perform a Maintenance Wash on the NovaSeq X Series Instruments](https://knowledge.illumina.com/instrumentation/novaseq-x-x-plus/instrumentation-novaseq-x-x-plus-reference_material-list/000007479.md).
3. If the wash completes without issue, proceed with run setup using the same consumables.

If the instrument fails to re-initialize or the wash fails to proceed with a similar Vacuum error, contact [Illumina Technical Support](https://www.illumina.com/company/contact-us.html#/united-states/technical-support).

\
\
\ <br>

|                                                                                                                                                                                                                                                                                                                                                                        |
| :--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------: |
| *For any feedback or questions regarding this article (Illumina Knowledge Article #9297), contact Illumina Technical Support* [*techsupport@illumina.com*](mailto:techsupport@illumina.com?subject=Question%2FFeedback%20Regarding%20Illumina%20Knowledge%20Article%20#000009297%20-%20Instrumentation%20\&body=Dear%20Illumina%20Technical%20Support,%0D%0A%0D%0A)*.* |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://knowledge.illumina.com/instrumentation/general/instrumentation-general-troubleshooting-list/000009297.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
